0086-512-58810860

Info@wanrooe.com

0086-18962233220

Menu

Radiator Separator Machine

Radiator separator machine copper tube and aluminum foil separator (also called radiator copper and aluminum separator), Radiator separator machine can quickly separate the copper tube and aluminum foil of the old air conditioner radiator without damaging the copper tube, and the aluminum foil is lumpy without powder. Large air-conditioning radiators do not need to be sawed and cut into small pieces in advance. Regardless of whether 4-layer or 6-layer copper pipes can be operated with one machine, the band saw pre-cutting process is eliminated, the waste of aluminum foil powder is reduced, and the output per shift is increased. After recycling, copper and aluminum can be sold separately to increase revenue. This machine is easy to operate, efficient and labor-saving, and has a broad market prospect. It is a fast and feasible project to get rich. It is widely used for dismantling and separating the internal copper and aluminum of waste air conditioners, old radiators, wastewater tanks, and auto parts.

Radiator Separator Machine
One-Stop Turnkey Solution

Specialize in providing one-stop turn-key solutions for
different types of customer.

Radiator Separator Machine
Professional Technical Team

Our service and spare parts department are efficient and rapid due to the
fact we have our very own highly skilled technicians.

Description & Application

Radiator separator machine copper tube and aluminum foil separator (also called radiator copper and aluminum separator), Radiator separator machine can quickly separate the copper tube and aluminum foil of the old air conditioner radiator without damaging the copper tube, and the aluminum foil is lumpy without powder. Large air-conditioning radiators do not need to be sawed and cut into small pieces in advance. Regardless of whether 4-layer or 6-layer copper pipes can be operated with one machine, the band saw pre-cutting process is eliminated, the waste of aluminum foil powder is reduced, and the output per shift is increased. After recycling, copper and aluminum can be sold separately to increase revenue. This machine is easy to operate, efficient and labor-saving, and has a broad market prospect. It is a fast and feasible project to get rich. It is widely used for dismantling and separating the internal copper and aluminum of waste air conditioners, old radiators, wastewater tanks, and auto parts.
The air-conditioning radiator separator can separate the aluminum foil on the outside of the old air-conditioning radiator from the copper pipe inside, and the recycler can sell the copper and aluminum separately to increase income. This machine is easy to operate, efficient and labor-saving, and has a broad market prospect. It is a fast and feasible project to get rich.

 

Application:
1. The radiator separator machine is specially used for processing aluminium copper radiators.
2. The radiator separator machine is suitable for separating one-row and two-row radiators. For radiators of more than 2 layers, please use a band saw to cut them into one layer or two layers.
3. Center distance of two copper pipes in radiators shall be 19mm or 21mm or 25mm. We could also customize as per the specific conditions.

Copper Aluminum Radiator Recycling Separator Machine application

Product Details

Radiator Separator Machine
Radiator Separator Machine
Radiator Separator Machine
Radiator Separator Machine
Radiator Separator Machine
Radiator Separator Machine
Radiator Separator Machine
Radiator Separator Machine

Product Video

Working Principle

1. Cut off the iron ends from the radiator, in case they will damage the blades.
2. Cut the clean radiators to 30-40cm wide with a band saw to fit the width of material inlet (We also provide the band saw if you need it).
3. To process two-row radiators, remove the roller from the lower cutter shaft to expose the blades.
4. Push radiators into material inlets according to the respective center distance, the left(right) side of radiators must touch the left(right) side of material inlet, thus each feeding gear will be at the middle of each two copper pipes.
5. For two-row radiators, the first copper pipe in the upper layer shall be nearer to the left side, otherwise the copper pipes won’t come out. You can also make the right side of radiators touch the right side of material inlets, then the first copper pipe in the lower layer shall be nearer to the right side.
6. Feeding gears gnaw at radiators and take them into the machine, the blades are right above each copper pipe and gash the aluminium fin, then copper pipes and aluminum fin will come out from the outlet automatically.

Technical Parameters

Model PNRS-850 PNRS-1200
External dimension((mm)) 1700*1000*1100 2100*1150*1100
Blade quantity (Pcs) 65 117
Diameter of blade (mm) 105+100 105+100
Number of platens (per platen) 70 121
Diameter of platen (mm) 125 125
Power (kw) 7 7
Weight (kg) 750 1250

Advantages

  • Radiator separator machine is suitable for dismantling and separating the internal copper and aluminum of waste air conditioners, old radiators and wastewater tanks;
  • Radiator separator machine can quickly separate the copper and aluminum inside the waste radiator and keep the original block shape;
  • The disassembly process of the radiator separator machine is completed by one machine, no other equipment is needed to assist production;
  • The separation speed of copper pipe and aluminum foil is fast, the work efficiency is high, the operation is simple and easy to maintain;
DROP US A LINE

Cooperation & communication


    Translate »